Black Zulu Special

Here is a variation of an old classic, the Black Zulu. This fly is tied on heavy wire grubber hook with a bead. Orange yarn is used instead of standard wool tag. It hardly makes a difference; actually this fly works well even without the tag.

I use this fly as a searching pattern. It works for trout, grayling, and white fish.

Storm Approaching

An August Morning

From Small Streams

Sometimes it gets down right magical.

Rod Building - Part 15.1: Who's whistling?

So far I have done all the steps required to build a fly rod. But there is a but. I have been casting with the rod and there are a few things I'm not happy with:

• The stripping guides are making a sound like whistling with sand in your mouth.
• Guides in the tip section are not perfectly aligned.

I think I'm going to buy some acetone and take a few steps backwards...

From Fly Rod

201

This is the post #201 of this blog. It has been fun, but...



... I'm going to continue nonetheless.

One of the highlights of this blog was when Jeffrey Prest, Features Editor of UK based 'Trout Fisherman' magazine, inquired could they publish a picture taken by me on their magazine. I naturally agreed and the following picture was published on the August 2007 issue.



It's not everyday that our toilet is on a magazine.

However, what has clearly been best is the new friends. Thank you.

Wyatt, how about a fly swap this winter?

Spey casting with a single-handed rod

Or Learning to cast again

I learned fly casting without instructors but by reading books, casting, and casting. It was in mid 80s and I was a pimple-faced teenager with a noodle fibreglass rod. Back then my books considered moving the wrist in casting as a critical mistake.

To keep a long story short, I haven't developed to be a great caster. Over the years I started to caught fish and was satisfied to my mediocre fly casting skills. At some point I reached the conclusion that only way to cast better was by applying less power. But then there is the thing called muscle memory. It has been very hard to change my casting stroke.

Beyond Overhead and Roll Casting

A few years ago I began to experiment with the underhand cast. It is widely popular here in Scandinavia, but I must confess that I haven't really mastered it. The I saw a video clip of the double spey cast with a single-handed rod. It looked familiar, and I realized that in fishing I used a cast not totally unlike the double spey. Then one day last summer I was fishing and I was casting the double spey. It felt great, and it was far more effective for the situation than traditional roll casting.



A few weeks ago a friend lent me a DVD entitled Rio's Modern Spey Casting, and I became a child again. I mean that I'm beginning to rival my kids on a competition how many times the same DVD can be watched. Simon Gawesworth has explained the basic principles of Spey casting to me so many times that they are starting to stick. Surely, in the DVD he casts mostly with a double-handed rod, but Spey casting is not about double-handed rods, it is about manoeuvring the line to position for forward cast, it is about D-loops and anchors. All these principles work with single-handed rods as well as with two-handed rods.

Wetting the line

I have been on a lake shore half a dozen times practising. The beginning was miserable. I think I managed to make every mistake possible. My D-loops were out of control, anchors either stick piles of line or nonexistent, and I apparently had no sense of timing. My hand was hurting as I tried to fix everything with power, a manly solution to everything. But my double spey was working and one switch cast out of twenty sent the line far and fine. So I returned home to listen Simon.

Last Saturday I went to the shore again.This time I had memorized the rod path for the snakeroll. I did it a dozen times and the misery continued. Only then I realized that my line was pointing to the wrong direction before the forward casting stroke. It was perfectly aligned if the direction I wanted to cast was behind me. I felt stupid when I realized that I drown a G-shape not the e-shape; clockwise instead of correct counter clockwise e-shaped rod path. I changed it and snakeroll started working, the anchor was right there where it was supposed to be. I added the splash-and-go timing of the airborne anchor cast and the line was flying and unrolling beautifully.



It felt great. And all the sudden I managed the switch cast and the single spey as well. All these casts have the airborne anchor. Splash-and-go, and it did.

My Spey casting has only began. There are lots of faults to be fixed. It is still quite common that the line (and my self esteem as a caster) falls down into a messed pile of misery. But when I concentrate well, have patience, and don't apply too much power, the line unrolls beautifully, or at least decently, and I have the sense of success that I need to keep on going.

At the moment like these I also remember that it is not the destination, it is about the journey.